Search the entire Pan Abrasives portfolio by product name, family, application or process.
Abrasive recovery and recycling systems for cleaning reusable media, removing dust and debris, and returning serviceable abrasive to the blasting process.
Accessories and replacement parts for blasting systems.
Hydraulic pull-off adhesion tester measuring the bond strength of applied coatings, available in standard and right-angle configurations.
Almen gauge for strip testing and shot-peening process verification.
Compact Almen gauge option for process verification.
Holders used to position Almen strips consistently during peening verification.
Almen strips used to establish and verify shot-peening intensity.
Blast cabinet range for controlled manual blasting applications.
Pressure blast pots for open blasting and blast-room applications, from compact units through full-size and bulk configurations.
Precision nickel comparator plate used for visual and tactile comparison of blast-cleaned surface roughness, available in grit-blast and shot-blast reference patterns.
Engineered blast-room systems combining enclosure, ventilation, dust collection, abrasive recovery and media handling around the required production workflow.
Complete Bresle-method test kit for measuring water-soluble salt contamination on blast-cleaned steel, including patches, deionised water, syringes and conductivity-meter consumables.
Glass-bead media for cleaning, conditioning and cosmetic finishing of metallic and non-metallic surfaces.
Controlled, high-roundness glass beads purpose-built for shot peening on critically-toleranced aerospace, automotive and medical components.
Certified calibration foils and zero disks spanning multiple thickness ranges, used to verify and calibrate coating thickness meters before use.
Centrifugal barrel finishing systems for accelerated deburring and finishing.
Centrifugal disc systems for rapid finishing of suitable components.
Alumina-zirconia ceramic grit range combining density, hardness, toughness and wear resistance for durable cleaning, surface preparation and finishing.
Zirconia-silica ceramic beads for clean, low-dust surface treatment of rubber & plastic moulds, castings, and boiler/heat-exchanger parts.
Fine zirconium silicate ceramic grit for controlled abrasive blasting, smooth surface finishing and preservation of fine geometries.
Alumina-zirconia ceramic grit for high-pressure blasting and surface preparation of very hard stone, mineral and industrial substrates.
High-density cerium-stabilized zirconia ceramic shot for high-energy shot peening, peen forming and precision surface treatment applications.
Zirconia-silica ceramic peening beads (Z-type, AMS 2431/7) achieving steel-shot-equivalent peening intensity with lower surface roughness and no ferrous contamination risk.
High-density yttria-stabilized zirconia ceramic shot for precision and high-energy shot peening, forming and surface finishing applications.
High-purity spherical zinc shot for effective cleaning with minimal substrate removal on non-ferrous and precision components.
Dry ice blasting machine family for industrial cleaning applications.
Coating-thickness measurement for metallic substrates.
Ferrous and non-ferrous replacement probes for coating thickness meters, including straight and right-angle configurations across multiple measurement ranges.
Concave test dolly enabling the adhesion tester to measure coating bond strength on the external surface of pipes, across a wide range of pipe diameters.
Convex test dolly enabling the adhesion tester to measure coating bond strength on the internal surface of pipes, across a wide range of pipe diameters.
Blended QuickCut aluminium oxide and BrightBlast glass beads developed for controlled deflashing and surface finishing.
Handheld meter measuring surface temperature, air dewpoint and the temperature differential, used to confirm that climatic conditions are suitable for coating application.
Drying systems supporting mass-finishing process flow.
Dust test tape and comparator chart for assessing the quantity and size of dust particles remaining on blast-cleaned steel before coating.
Custom-engineered PanBlast systems integrating blasting, recovery, recycling, ventilation, dust collection and material handling for project-specific requirements.
Angular blast media manufactured from 100% recycled bottle and plate glass for fast cleaning and consistent surface profiling.
Almandine garnet blasting media for fast cutting and controlled profiling.
Sharp, hard angular chilled iron grit for extremely fast blast cleaning of steel and iron components.
Hard spherical chilled iron shot for rapid cleaning, controlled impact treatment and selected high-density applications.
Certified flapper (roto) peening kit for small, hard-to-reach area repair — includes a precision digital Almen gauge, magnetic holder, Almen strips, tachometer, loupes, mandrel and flap wheels. Certified to SAE AMS2590 and SAE AS2592.
Portable flapper (roto) peening kit for small, hard-to-reach area repair without a blast cabinet — includes a digital Almen-type gauge, strip holder, Almen strips, tachometer, loupes, mandrel and flap wheels.
Variable-speed electric motor, dial speed control and flexible shaft with handpiece — the drive unit that powers flap-wheel attachments in flapper (roto) peening kits verified with Almen or digital gauges.
Very hard, sharp abrasive for fast cutting, cleaning and etching of hard surfaces.
DC voltage holiday detector for locating pinholes, voids and flaws in insulated coatings on conductive substrates, available across multiple voltage and coating-thickness ranges.
Brass-filled broad brush electrodes for scanning coatings on large flat areas with a holiday detector.
Insulated extension rods that extend the reach of holiday-detector brush and rolling-spring electrodes.
Phosphor bronze rolling-spring electrode for scanning coatings on the external diameter of pipes with a holiday detector.
Low-cost expendable copper slag for open blast cleaning, rapid cutting and surface preparation.
Specialty engineered plastic blasting media for removing bonded adhesive squeeze-out, sealant and selected coatings while preserving underlying substrates and protective coatings — BB1 (multi-colored) for fast squeeze-out removal, BB2 (clear) for lower-pressure, primer-safe cleaning.
Plastic media for controlled burr removal and deflashing applications.
Plastic media for controlled deburring and low-impact cleaning applications.
Manufactured media for controlled coating removal where substrate damage must be minimized.
Recyclable bead media for milling and process applications.
Organic abrasive media for cleaning and finishing where lower aggressiveness is preferred.
Operator-protection products for abrasive blasting work.
A consolidated case of inspection instruments covering coating thickness, surface profile and surface cleanliness testing for blast-cleaned steel, bringing the core gauges needed for a full inspection into one kit.
Reflective glass beads for road marking, highway and runway striping, with Drop On, Intermix and Premix types.
Metallic grit positioned for stone and granite cutting applications.
Recyclable metallic grit for cleaning and surface preparation applications.
AMS 2431 / SAE J441 certified carbon-steel peening shot in Regular (ASR) and High (ASH) hardness grades for stable Almen intensity and uniform coverage.
Water-atomised, heat-treated carbon-steel shot for descaling and cleaning steel components prior to coating.
Indicator papers that detect water-soluble iron salts trapped at the base of rust pits after blast-cleaning, flagging contamination that would otherwise induce early corrosion under a coating.
Sub-angular olivine mineral abrasive for rapid cleaning, profiling and controlled surface preparation.
PanBlast Q034 330/80 blast wheel blade for compatible LE type wheel blast equipment.
PanBlast Q034 blast wheel control cage for compatible LE type wheel blast assemblies.
PanBlast Q034 blast wheel impeller for compatible LE type wheel blast assemblies.
Angular aluminium oxide for dry and wet processing where a controlled profile or finish is required.
Gauge system used with replica tape to measure blast-cleaned steel surface profile.
Heavy-duty RotaMax blast wheel assembly for higher abrasive throw rates and demanding production wheel-blast applications.
Compact bi-directional blast wheel assembly with a TEFC flange motor directly mounted to the wheel, external blast-pattern adjustment through the control cage, and a heavy-duty base plate.
Rotary tumbling equipment for batch finishing processes.
Visual reference standard specifying rust grades and surface-preparation grades for blast-cleaned steel, used to confirm preparation standard before coating.
300-series cast stainless steel shot for durable cleaning, bright finishing and shot peening applications.
Mineral abrasive supplied for comparison and selected industrial uses. Pan Abrasives does not recommend silica sand for abrasive blasting.
PanBlast SK 13/15 blast wheel control cage for compatible Speedlock type wheel blast assemblies.
PanBlast SK ST1 blast wheel impeller for compatible Speedlock type wheel blast assemblies.
Compressible-film replica tape that captures an accurate impression of blast-cleaned surface profile, read with a companion snap gauge to obtain average maximum peak-to-valley measurements.
PanBlast TS T-37 wheel blast vanes supplied as a set for compatible Toyo Seiki type blast wheels.
Vibratory bowl finishing systems for deburring, smoothing and polishing.
Vibratory separation equipment for component and media handling.
Notched wet-film gauge for measuring paint thickness immediately after application, before the coating cures.
Rounded/conditioned cut-wire peening media in Carbon Steel and Stainless Steel (304/430) grades for stable Almen intensity and long media life.
As-cut cylindrical wire abrasive in Aluminium, Carbon Steel, Stainless Steel (304/430) and Zinc grades for general cleaning, deburring and surface preparation.
