AQUABLAST

This Aquablast Pot is suitable for blasting contractors working on projects that require both wet and dry blasting. The combination of wet and dry blaster in the one machine greatly increases its potential applications for professionals.

In wet blasting mode, the absence of heat build-up prevents damage when working on delicate car panels, fibre-glass or wooden structures. It also removes paint, primer, rust and other contaminants quickly and easily.

Also, the reduction of airborne particles during operation makes it the cleaner, greener choice without compromising on performance.

Technical Specification

·  Maximum Fluid Working Pressure

->100 psi (7 bar)

·  Maximum/Minimum Air Pressure

-> 100 psi/20 psi (7 bar/1.4 bar)

·  Maximum Fluid Flow

-> 5.0 gallons per minute (18.9 litres/min)

·  Maximum Pump Speed 320 (Dry) Cycles per Minute

-> 250 (wet) cycles/min

·  Volume per Stroke

-> 0.006 gal (23 cc)

·  Volume per Cycle

-> 0.012 gal (46 cc)

·  Maximum Suction Lift Dry

-> 8 - 10 ft (2.5 – 3 m)

·  Maximum Size Pumpable Solids

->0.06” (1.5 mm)

·  Maximum Operating Temperature

-> 180°F (82°C)

·  Maximum Air Consumption

->9.0 scfm (0.252 m³/min)